FPT Industrial Showcases it’s Full Stage V Technology Range at Powergen in Dallas

FPT Industrial was diamond premier sponsor and exhibitor at POWERGEN International in  Dallas (Texas, USA), the largest network and business hub for power generators, displaying  its cutting-edge Stage V/EPA Tier 4 Final engine technology. From May 23 to 25, FPT  Industrial’s stand at the Kay Bailey Hutchinson Convention Center (Booth #5000) showcased  its full Stage V/EPA Tier 4 Final range including the F36, N67 and Cursor 9. The efficient N67  Tier 3, and the engine of the future, the Cursor X, completed the line-up.

F36 STAGE V/TIER 4 FINAL – THE PERFECT ENGINE FOR THE MOST DEMANDING  MISSIONS 

The F36 stands out for its power density, offering an increase of 25% on previous generations,  covering up to 100 kVA for the most demanding applications. Add in low operating costs and exceptionally easy maintenance, and you have the ideal unit for the most demanding  missions. 

Thanks to the lowest EGR rate in the market (<10%) and optimized Cooling Pack, the F36 offers  high performance in a compact layout – a ready-to-run system, featuring pre-assembled G Drive and ATS. One-side serviceability allows for fast and easy maintenance, while the  possibility to switch from 1,500 to 1,800 rpm for all customer requirements (50/60Hz) helps  minimize warehouse stock. 

F36 Stage V/Tier 4 Final technical specifications: 

Engine Displacement (l): 3.6
Cylinder Arrangement: in-line 4
Maximum Genset Prime Power (kWe @ rpm): 92 @ 1,800
Service interval (Hours): 600
Emissions Standard: Stage V and Tier 4 Final

N67 STAGE V/TIER 4 FINAL – SPECIFICALLY DESIGNED FOR HEAVY APPLICATIONS  AND HARSH AMBIENT CONDITIONS, BOTH LOW LOAD AND LOW TEMPERATURE 

Developed to satisfy the most demanding customer requirements, the N67 is the perfect  proof of FPT Industrial’s technological excellence. 

The maintenance-free ATS, featuring 5th generation Hi-eSCR technology, delivers optimized  urea consumption, down to 6.3% (av. 8%). The EGR-free combustion maximizes power,  optimizes fuel efficiency, and enhances reliability thanks to its lean engine layout.

All these state-of-the-art technical solutions allow engine uptime to be maximized with the  minimum oil quantity (oil system capacity 17.5 l). Warehouse stock minimization comes courtesy  of the possibility to switch from 1,500 to 1,800 rpm for all customer requirements (50/60Hz).

N67 Stage V/Tier 4 Final technical specifications: 

Engine Displacement (l): 6.7
Cylinder Arrangement: in-line 6
Maximum Genset Prime Power (kWe @ rpm): 186 @ 1,800
Service interval (Hours): 600
Emissions Standard: Stage V and Tier 4 Final 

CURSOR 9 STAGE V/TIER 4 FINAL – THE BEST SOLUTION FOR HIGHLY DEMANDING  APPLICATIONS, BOTH FOR POWER GENERATION AND POWER UNITS 

Designed for prime and stand-by applications, Cursor 9 offers top power, fast load  response and best-in-class total cost of ownership with high power density. High  efficiency, proven reliability, long maintenance intervals, and premium performance make this  power unit the state-of-the-art of engine for power generation. An extremely compact second 

generation Common Rail system and EGR-free architecture allow for a compact footprint  and low running costs.
This ready-to-run system, with Cooling Pack and Air Cleaner pre mounted for fast and easy installation, offers the possibility to switch from 1,500 rpm to 1,800  rpm for all customer requirements (50/60 Hz) in order to minimize warehouse stock.

Cursor 9 Stage V/Tier 4 Final technical specifications:
Engine Displacement (l): 8.7
Cylinder Arrangement: in-line 6
Maximum Genset Prime Power (kWe @ rpm): 276 @ 1,800
Service interval (Hours): 600
Emissions Standard: Stage V and Tier 4 Final 

ATS PACK – A SMART INSTALLATION SOLUTION DESIGNED WITH CUSTOMERS’  NEEDS IN MIND 

Featuring a compact layout, and available for both N67 Stage V/Tier 4 Final and Cursor 9 Stage  V/Tier 4 Final, the ATS Pack is a pre-assembled, pre-wired and pre-validated solution for  flexible, fast and easy installation and labor savings. FPT Industrial’s “For Life” maintenance free technology guarantees maximum uptime. 

N67 TIER 3 – PROVEN ROBUSTNESS AND DURABILITY CONFIRMED BY MORE THAN 2  MILLION NEF ENGINES PRODUCED SINCE 2001 

The N67 Tier 3 engine offers impressive power and load acceptance with top-class levels  of reliability and efficiency. FPT Industrial’s patented Common Rail injection system  guarantees low fuel consumption (fuel savings of up to 10% vs. premium brand competitors), while 600- hour service intervals keep operating and maintenance costs down. Optimized installation  footprint and reduced logistical costs complete the all-round efficiency of this solid and  straightforward power generation solution.

N67 Tier 3 technical specifications:
Engine Displacement (l): 6.7
Cylinder Arrangement: in-line 6
Maximum Genset Stand -by Power (kWe @ rpm): 197 @ 1,800
Service interval (Hours): 600
Emissions Standard: TIER 3 

CURSOR X – THE POWER SOURCE CONCEPT DESIGNED FOR PLANET EARTH 

FPT Industrial’s Cursor X 4.0 Power Source Concept is symbolic of the Brand’s conception  of innovation, also reflecting its product strategy vision, and underlining its commitment to  research and development into alternative fuels. 

The Cursor X is “designed for Planet Earth” and characterized by four “M’s”: Multi-power,  Modular, Multi-application and Mindful.  

Multi-power: any energy, any mission 

The Cursor X concept would adapt to provide the most suitable solution for the customer’s  business and mission, whether based on natural gas internal combustion, hydrogen fuel cell  electric generation, or battery-stored energy. 

Modular: one engine, customized performance 

The power source concept would be the same size as an internal combustion engine, with a  modular architecture that allows easy assembly, vehicle integration, servicing, and full  scalability. 

Multi-application: endless possibilities 

Thanks to its wide range of options, the Cursor X is designed to supply energy for traction,  auxiliary systems, implements, and PTOs to any kind of industrial vehicle or machine – from  delivery vans and buses, small dozers and crawler excavators, to specialty tractors and  combines.

Mindful: introducing a new era 

The power source concept has been designed to have self-learning capabilities and to provide  a significant amount of information for further hardware and software design developments. It  could be equipped with processors and sensors to detect faults, analyze wear and tear, and  predict maintenance requirements. 

“Perfectly consistent with POWERGEN International 2022’s theme – Destination 2050 – our  powerful display of Stage V/EPA Tier 4 Final power generation solutions offered further  confirmation of FPT Industrial’s leadership in this business in North America,” said Braden  Cammauf, Vice President FPT Industrial North America, “As well as a strong affirmation that  performance and sustainability can progress together, going beyond today’s industry  requirements. Pioneering the most innovative and sustainable solutions for both our customers  and our planet is a mission we are always aiming to fulfill.” 

FPT Industrial is a brand of Iveco Group, dedicated to the design, production and sale of powertrains for on-road  and off-road vehicles, as well as marine and power generation applications. The company employs more than  8,000 people, in 11 plants and 11 R&D centers. The FPT Industrial sales network consists of 73 dealerships and  about 800 service centers in almost 100 countries. A wide product offering, including six engine ranges from 42  hp up to 1,006 hp, transmissions with maximum torque of 200 Nm up to 500 Nm, front and rear axles from 2 to  32 ton GAW (Gross Axle Weight). FPT Industrial offers the most complete lineup of natural gas engines on the  market for industrial applications, with power that goes from 50 to 460 hp. This extensive offering and a strong  focus on R&D activities make FPT Industrial a world leader in industrial powertrains. For more information, go to  www.fptindustrial.com.